Gary Sheedy

Sheedy wird auch auf die internationale Geschäftsentwicklung aktiv Einfluss nehmen Ottawa , IL / Galyway, Irland – B+B SmartWorx, ein führender Entwickler von robusten, drahtlosen und drahtgebundenen M2M (Machine-to-Machine) Verbindungs-Lösungen für raue Umgebungen sowie IoT Lösungen, bestellte mit dem seit über 20 Jahren in der High-Tech Industrie tätigen Gary Sheedy einen erfahrenen Manager für die EMEA Organisation. Ihm unterstehen als General Manager von Galway (Irland) aus die EMEA Vertriebsteams und er trägt die Profit & Loss Verantwortung für die EMEA Region. Hinzu kommt, dass er aufgrund seiner langjährigen fundierten Erfahrungen aktiv auf die......

Continue Reading


Built OEM For You

Henry Ford once said that he would give you any color car you wanted… as long as it was black. Well, I’d like to think we are a little more accommodating that old Mr. Ford.  I was recently contacted by a customer that needed an RS-232 to RS-485 converter. No problem there… we have dozens of them. The problem was that they wanted 1.7 K Ohm biasing instead of our standard 1.2K Ohm. They also wanted the converter preconfigured to 4-Wire mode. To top it off, they needed their own logo and......

Continue Reading


iMedia Chassis

B+B SMARTWORX STELLT MULTIPORT IMEDIACHASSIS FÜR CWDM SERVICES VOR Kostengünstige und kompakte integrierte CWDM Lösungen adressiert Internet Service Provider, Rechenzentren und Telekom-Provider Ottawa , IL / Galyway, Irland, 5. Juni 2014 – B+B SmartWorx, ein führender Entwickler von robusten, drahtlosen und drahtgebundenen M2M (Machine-to-Machine) Verbindungs-Lösungen für raue Umgebungen sowie IoT Lösungen stellt das iMediaChassis vor. Mit der Multiport iMediaChassis Familie von B+B SmartWorx ist für ISPs und Rechenzentrum-Betreiber eine kostengünstige und extrem kompakte Box-Lösung im 3 HE-Format für CWDM-Services verfügbar. Zusätzlich zur physikalischen Konversion von lokalen Glasfaser- oder Kupfer-Leitungen in spezifische CWDM Wellenlängen bietet das Produkt......

Continue Reading


Installers and integrators often test media converters and other network equipment,  to ensure the equipment functions properly, before installing them at the end customer’s site.  Having invested in bench test equipment, integrators and installers  test the media converters for valid link and passing data.  If the equipment is not linking/passing data, it’s a lot easier to troubleshoot  in a lab. Generally, when new equipment is tested, 85% of the time problems occur due to a mismatch of speed, duplex, protocol, or fiber type. So it usually isn’t a case of bad equipment.......

Continue Reading


Page 64 of 68« First...102030...6263646566...Last »